Fly Tying Tools
After SwissCDC have made a wide range of diverse very good fly-tying materials available to you, they made an effort to produce a fly-tying tool reflecting the quality of Swiss CDC fly-tying materials. Swiss CDC employee Christian Kuchelmeister thought a lot about design and practical application and developed a tool in an unrepresented quality and function. Swiss CDC Multiclamp is a non-daily multifunctional tool exceling the quality of previous tools. A tying tool in Swiss quality. Swiss CDC Multiclamp is a modern material clamp made of high-strength stainless steel. The surface is not dazzling. The design is modern but at the same ...
FITS Tubing Needles & Devices can be used for tying FITS Tubings. FITS Tubing Needle The FITS original needle is especially developed for the flexible FITS tubing system. With the four different diameters you will tie on all FITS tubing. The tubes will be held firmly with out problems to take out the ready fly. This needle opens for all possible tube combinations. It is made of hardened steel with a foot that fits all kinds of tying vises. A tool made for thousands of flies! It simply FITS. FITS Tubing Device This genius little tool consists of an original FITS tubing needle that ...
Morrish Mouse Foam Body Cutter allows you to create realistic foam parts fast and easily. Cutter is extremely sharp so it's easy to cut big amounts of alike pieces for your use. Package includes both cutter and a small cutting pad. By using cutting pad you will increase your product's lifetime. Can be used for deadly mouse imitations. Use for creating foam backs for deadly mice imitations. Cutter length approximately 5 cm and the widest point 11 mm
Stonfo Thread Splitter is a high precision tool that allows to split thin threads to make dubbing loop on small size flies. The splitting operation, very difficult to perform manually, becomes easier thanks to Thread Splitter. Stonfo's high quality tool Use for splitting tying thread Makes dubbing easy
Joe Blado's Crease Fly Cutters allow you to create foam parts fast and easily. Cutter is extremely sharp so it's easy to cut big amounts of alike pieces for your use. Package includes always a small cutting pad. By using cutting pad you will increase your product's lifetime. Joe Blado's Crease Fly Cutters are designed for tying crease flies. Body and back of the crease fly is tied of one single piece of foam. Crease flies can be fished just below surface or with occasional splashes, like poppers, depending on how you tie and retrieve your fly when fishing. Popular fly for tropical saltwater fish ...
Italian Ringlock Straight Scissors for fly tying. When the screw loosens on a pair of scissors, the cutting efficiency and precision sharply declines. The Ring Lock System resolves this problem by keeping the blades consistently and properly set at all times. Available in different lengths and with curved or straight blade. Suitable for soft natural fly tying materials, don't use for metals or hard plastics.
Stonfo Travel Tool Set is a complete travel set which includes 8 fly tying tools. Supplied in a strong and elegant case which rubber interior is shaped to give each tool a precise housing. The set includes: Small Scissor Bobtec1 bobbin with adjustable thread tension Bobbin threader Finisher-Conical finisher Bodkin Hackle pliers Rotodubbing mini Pettine comb Inside detailed instructions of the various tools. Ultra-light: 200 grams. Size of the box is approximately 2 x 11 x 15 cm.
Stash Dub Pods - package includes two 12 compartment pods which can be used as is or mountable anywhere with the super high tack adhesive tabs that are included. Use for storing dubbings. Package includes two compartment pods and super high tack adhesive tabs Size about 13 x 8 x 1 cm Compartment pod is divided in to 12 small slots (size 7 x 10 mm)
Dubbin Loop Prep Pad Kit helps you to create nice dubbing loops. Preparation pad is made of soft foam. Measurement lines helps to make even quality. Comes with prep pad and one large Stonfo material clip. Package includes prep pad and material clip Size of the prep pad is approximately 10 x 9 x 2,5 cm
FTS Tube Fly Tool can be used for tying tube flies with traditional fly tying vise. Flat section on the tool fits most jaws. Needle is tightened with the knob under the tool. Package includes tool and three needles. Needle diameters are approximately 1,2 mm, 1,4 mm and 1,6 mm. Length of the needles is approx. 10 cm.
Thread Sealer II is perfect for cutting thread, removing loose fibers or burning deerhair or wool to inlay eyes. Works with one AA battery, not included. NOTE: You must let the tip warm well and let the tip burn the material before sweeping the tip through or the tip may break. Don't make fast movements. Do not use in the presence of flammable gases/materials or oxygen-rich enviroments. Remove the tip when the device is in storage or not in use.
Sight Light Magnifier - hands free with 3 different lens magnifier is great for fly tying and other hobbies which require precision. Optical grade quality lenses. A swivel LED light helps light up your project. 3 super sharp optical grade quality lenses (1,6x, 2,0x and 2,25x) Swivel LED light Batteries included
Screw Cap Container Box Set is perfect storage solution for dubbing, beads & hooks. Helps you to get your fly tying materials organized. Two sizes available: Small: Size of the whole box is 16 x 13 x 3 cm. Screw cap containers' size is 2,5 x 2,5 cm. 30 screw caps in total. Large: Size of the whole box is 24 x 16 x 2,5 cm. Screw cap containers' size is 3,8 x 2,5 cm. 24 screw caps in total.
Stonfo Magnifying Glass - Suction Cup Base is high quality magnifying glass, allows to clearly see small details without distorsions. The flexible arm has a powerful suction cup base with lever device to guarantee a quick and stable locking. Removing the suction cup, this magnifying glass can be attached easily on the Stonfo Tool Bar, on the pedestal base of the Elite Vise and of the Transformer Vise. 2X Magnification Lens diamension 80 mm Length of the flexible arm 350 mm Weight 165 grams Suction cup, can be removed
Stonfo Detached Body Tool is the ideal product for tying detached body. It is made of a stainless steel micro-tube with a spring material clip. The tubular structure allows to insert inside a nylon as support for the tying of very small bodies with different materials. The package includes two different sizes with diameters of 1,0 and 0,8 mm.
Smhaen Bobbin is a super functional, micro-adjustable tension fly tying bobbin. Whether you're a beginner or a professional fly tyer the bobbin delivers maximum thread control, thanks to a unique patented tension system, placed so you are able to adjust tension with only one finger, while still working on your fly. With perfectly designed ergonomic frame shape you don’t even feel the internal tension system in your hand. A ceramic tube and the well balanced bobbin holder gives you perfect thread control. The Bobbin holder is available in two different sizes. A regular size, in a red color. And a midge size in a blue color. The regular ...
Bonefish/Permit Crab Foam Body Cutter – Make foam bodies for crab patterns quickly and easily. A few coats of paint and acrylic will allow you to make super-realistic crabs. Got less time? Just punch out two crab bodies, add legs, eyes and feathers and a few dabs of super glue and you are ready to go! Crab Bodies are available in four sizes: Extra Small: 1,9 cm (3/4") wide Small: 2,2 cm (7/8") wide Medium: 2,5 cm (1") wide Large: 2,9 cm (1-1/8") wide Package includes both one cutter and a small cutting pad. By using cutting pad you ...
Smhaen Half Hitch Tool is currently the only half hitch tool in the world with an extremely functional, integrated and replaceable cutter. For both beginners and professional fly tyers, the half hitch tool provides a fast, easy way to lock the thread and cut it when finishing. The half hitch tool provides maximum, easy thread control because of the large ergonomic diameter. For safety and protective reasons, the cutter is integrated in the tool. The cutter can be pushed out via the coloured button placed in the middle of the tool. The cutter is an spring affected cutter, which means that it ...
HMH Shank Adapter Tool fits in any vise and gives you the best hold on any straight shank (greater than 0,89 mm (.035") diameter). Also can hold plastic or metal tubes up to 2,38 mm (3/32") diameter. Comes with two pins to stiffen platic tubes. Length of the tool is about 5 cm. Length / diameter of the pins are 48 mm / 1,05 mm and 46 mm / 1,6 mm.